Waxing Kit with Mini Wax Heater

Mini wax heater kit BRONSUN

Allows for maintaining a flawless eyebrow shape and removing unwanted facial hair both at home and on trips. Safe for sensitive skin: gently removes even short hairs (from 1 mm), causing no damage or irritation.

The kit includes all necessary items for performing waxing: a mini wax heater, granulated wax, and wooden spatulas.

Quickly and evenly melts wax granules (in just 5 minutes!), weighs only 40 grams, and can be powered via a USB cable connected to a power bank or laptop. The cooled wax comes off the silicone bowl in one easy motion.

Convenient format allows you to measure exactly the amount you need. The wax melts at a comfortable temperature of 40 °C, minimizing the risk of burns.

The kit includes all necessary items for performing waxing: a mini wax heater, granulated wax, and wooden spatulas.

Convenient format allows you to measure exactly the amount you need. The wax melts at a comfortable temperature of 40 °C, minimizing the risk of burns.

Mini wax heater BRONSUN

Portable wax heater BRONSUN melts wax in just 5 minutes, significantly reducing preparation time.

Thanks to its compact size, the appliance does not take up much space and is perfect for heating small portions of wax. Its user-friendly design makes it an ideal choice even for at-home use.

The wax heater weighs only 1.41 oz (40 g)!

Comes with a silicone bowl that is easy to clean once the wax has completely cooled.

The kit includes

Portable wax heater BRONSUN — 1 pc.
Eyebrow depilatory hot wax BRONSUN, 0.88 oz (25 g) — 1 pc.
Wooden wax sticks — 5 pcs
User manual — 1 pc.

Directions for use

01Place the wax heater on a flat dry surface. Open up the lid, put the silicone bowl inside the appliance, and pour the required amount of Eyebrow depilatory hot wax BRONSUN in it.
02Use the power cord to connect the wax heater to the power source and heat up the wax.
03The red light indicates the heating process. When the indicator light turns green, use a spatula to check if the wax is ready to use. The ideal consistency is homogeneous and sufficiently flexible. Too liquid consistency means that the wax is overheated. If you have overheated the wax, carefully disconnect the wax heater from the power source and wait until the wax cools down to the needed temperature.
04After preparing the wax, disconnect the power cord from the power source and then from the wax heater. Proceed to the eyebrow waxing.
05Cleanse the eyebrow area with Eyebrow pre wax cleansing lotion BRONSUN. If needed:
- use Eyebrow pre wax cooling lotion BRONSUN to minimize discomfort;
- apply Eyebrow depilatory oil BRONSUN if the skin is dry.
06Make sure the wax is at a comfortable temperature for applying to the skin.

07Apply a thin layer of the wax in the direction of hair growth, pressing the spatula firmly to the skin. Ready-to-remove wax is not sticky to touch.
08Holding the skin taut in the opposite direction of wax removal, swiftly remove the wax parallel to the skin.
09Remove the wax residue with a cotton swab or cotton pad soaked with Eyebrow depilatory oil BRONSUN.
10Finish the procedure by applying Eyebrow post wax lotion BRONSUN. Do not rinse.
11After the wax heater has cooled down completely and the wax residue has hardened, clean the silicone bowl.

The red light on the body of the wax heater indicates that heating has started, the green light means the wax is ready to use. Before applying, make sure the wax is at a comfortable temperature!